|
Post by pasacancha on Oct 17, 2008 9:54:35 GMT -5
We were told hole 1 was 620.8m on a 50 degree angle. That comes to about 400m vertical depth and 475m horizontally. media3.marketwire.com/docs/drv728.pdfIf you look at the above map you can draw a line 475m SW from hole 1 (PLT11) and you will find it will have travelled approximately 150m below tunnel level 3940 200m below 3890 150m below 3790 and ended somewhere around 160m below 3670 Review some tunnel samples here media3.marketwire.com/docs/pasacancha_map.jpgIt sounds like Pasacancha drilling may be very slow going. It is a difficult area to drill and the rock is very difficult. We must be patient with this one! However with several copper targets and a gold target we shouldn't become too bored
|
|
|
Post by caveman on Oct 17, 2008 14:18:51 GMT -5
so how about 60g/t silver on hole 1? i wonder if they tried to pick the best spot to drill the first hole or if it was just randomly picked as one of the potentially good spots.
|
|
|
Post by rocketscientist on Oct 21, 2008 18:44:17 GMT -5
My guess is that the whole pasacancha mountain is silver/gold/zinc/copper etc so pretty much any spot is a good spot to drill ...
|
|
|
Post by Gr8rMinds on Oct 21, 2008 20:06:09 GMT -5
Niiice....I hope it is full of gold. I need to buy a new pair of shoes
|
|